- New functions:
- Automatic unstressing at both ends, increasing the service life of the shutter and preventing distortion of the shutter box.
- Automatic clearing of the object after obstruction detection.
- This version replaces the previous version.
- CAUTION: Short motor with loose external Ilmo circuit board
- Tubular motor 230 V/50 Hz for motorising roller shutters starting from a width of 425 mm.
- No adjustment required.
- Cannot be used with spring blades. The motor always switches off on resistance.
- Fits into a tube of minimum internal diameter 47 mm.
- Runtime limited to 3 min.
- Supplied as standard including Ilmo 2 WT circuit board module, white 4-core (VVF) cable (length 3 m) and with cable with motor connector.
- Axial and radial cable outputs.
- Not suitable for continuous use.
- Intelligent obstacle detection in both up and down direction. Attention for unrolling the roller shutter blade in the roller shutter box.
- Quick installation using the unique clip system.
- The frost protection works only with closed slats. The motor won’t detect the frozen shutter when it happens with open slats (ventilation).
Benefits
For you professionals
- Plug & play adjustment: not a single action is required. The rotation direction is changed by switching the wires.
- Automatic setting of up end limit: Quick adjustment. Always a roller shutter with a maximum opening.
- Automatic setting of the down end limit: Quick adjustment. Always a perfectly closed roller shutter.
- Parallel switching possible: fewer wires simplify the installation.
- No access to the motor head required for the setting or adjusting of the end limits: roller shutter box does not need to be opened.
- Use of the Help me app: free app with all the settings, easily explained and off line available.
For your customers
- Obstacle detection: protect your roller shutter and your property.
- Frost protection: the roller shutter and motor will not be damaged in the event of frost, when the roller shutter was in an end position.
- Periodic calibration of the end positions: always a perfectly opened or closed roller shutter.
- Unstressing in the end points: Avoid exerting extra pressure to extend the service life of the roller shutter and the motor.
This product has been eco-designed
Decarbonising our products is our commitment to reducing their environmental footprint throughout their life cycle. We specifically target the phases that generate the most carbon impact.
PEP Ecopassport® evaluates the full environmental impact of the product. A Type III Environmental Product Declaration according to ISO standards, validated by an accredited third party.
The carbon footprint of the ILMO 50 S WT 6/17 VVF 3M- BAR is 61.3 kg CO₂.